The Premium Fixing-Free Edge Protection

EasyRail

The Premium Fixing-Free Edge Protection

EasyRail

A favourite with roofing contractors such as roof plumbers, restorers and asbestos removal contractors.

 

The system is designed to be used without fixing to the building that is being worked on, meaning that no patching is required after use and no sheet or tile removal is required, as is the case with standard edge protection, which fixes to the rafters.

Upright posts are secured to the building using a cantilever bracket that tightens under the eves.  With no bolts required, damage to the facade is avoided, and posts can be easily relocated around the building as required.

Lower, mid and top guardrails are added between the posts using couplers and aluminium tube to complete the fast and effective edge protection system for roofs.

For facade access below the soffits, add Easy Deck cantilever brackets at any height to support access platforms and guardrails.

An added benefit is the speed and ease of installation – EasyRail is proven to be up to three times as quick to install as standard edge protection.

Features & Benefits:

  • Easyrail roof edge protection is available in 4 standard post heights, 1m, 2m, 3m and 4m these can also be joinedusing the Easyrail joining spigot.
  • For installation, the cantilever bracket simply slides up the posts and is tightened under the eaves.
  • Using couplers and aluminium tube, base, mid and top rails can be installed in seconds.
  • Easyrail is the ultimate safe solution for any low level roof edge protection application you may have.
  • Available in ready to go house packs.
  • Also available in individual components

 

  • NZ's most simple and effective residential roof edge protection solution
  • proven to be up to three times as quick to install as standard edge protection
  • It requires minimal fixing to the (house) and can be set up with one person
  • EasyRail is the ultimate safe solution for any low level roof edge protection application you may have
  • Redesigned house packages avalible on request
  • Compliant to 4994:2009
  • Made in NZ
SKU: PACK A
EasyRail Pack A

PACK A - HALF GABLE END & 6.0M OF STRAIGHT EDGE PROTECTION


INCLUSIONS:

AER300.400 - 4.0m EasyRail Truss, Roof Post x 4

AER300.200 - 2.0m EasyRail Truss, Roof Post x 2

AER350.600 - EasyRail Tube 6.0m length x 5

AER610.300 - 0.30m EasyRail Cantilever Bracket x 4

ER500.060 - 0.60m Base Jack - Adjustable x 4

IN48 - EasyRail Internal Joining Spigot x 4

FX48 - EasyRail Fixed Double Coupler x 9

SW48 - EasyRail Swivel Coupler x 4

SKU: PACK B
EasyRail Pack B

PACK B - FULL GABLE END & 12.0M OF STRAIGHT EDGE PROTECTION


INCLUSIONS:

AER300.400 - 4.0m EasyRail Truss, Roof Post x 8

AER300.200 - 2.0m EasyRail Truss, Roof Post x 1

AER300.100 - 1.0m EasyRail Truss, Roof Post x 2

AER350.600 - EasyRail Tube 6.0m length x 10

AER610.300 - 0.30m EasyRail Cantilever Bracket x 8

ER500.060 - 0.60m Base Jack - Adjustable x 8

IN48 - EasyRail Internal Joining Spigot x 6

FX48 - EasyRail Fixed Double Coupler x 15

SW48 - EasyRail Swivel Coupler x 12

SKU: PACK C
EasyRail Pack C

PACK C - STRAIGHT EDGE PROTECTION 6.0M


INCLUSIONS:

AER300.400 - 4.0m EasyRail Truss, Roof Post x 2

AER350.600 - EasyRail Tube 6.0m length x 3

AER610.300 - 0.30m EasyRail Cantilever Bracket x 2

ER500.060 - 0.60m Base Jack - Adjustable x 2

FX48 - EasyRail Fixed Double Coupler x 6

SKU: PACK D
EasyRail Pack D

PACK D - GABLE END ONLY 12.0M


INCLUSIONS:

AER300.400 - 4.0m EasyRail Truss, Roof Post x 5

AER300.200 - 2.0m EasyRail Truss, Roof Post x 1

AER300.100 - 1.0m EasyRail Truss, Roof Post x 2

AER350.600 - EasyRail Tube 6.0m length x 4

AER610.300 - 0.30m EasyRail Cantilever Bracket x 5

ER500.060 - 0.60m Base Jack - Adjustable x 5

IN48 - EasyRail Internal Joining Spigot x 6

SW48 - EasyRail Swivel Coupler x 12

SKU: PACK E
EasyRail Pack E

PACK E - FULL HOUSE LOT 52 METRES


INCLUSIONS:

AER300.400 - 4.0m EasyRail Truss, Roof Post x 16

AER300.200 - 2.0m EasyRail Truss, Roof Post x 6

AER350.600 - EasyRail Tube 6.0m length x 26

AER610.300 - 0.30m EasyRail Cantilever Bracket x 16

ER500.060 - 0.60m Base Jack - Adjustable x 16

IN48 - EasyRail Internal Joining Spigot x 24

FX48 - EasyRail Fixed Double Coupler x 38

SW48 - EasyRail Swivel Coupler x 16

A favourite with roofing contractors such as roof plumbers, restorers and asbestos removal contractors.

 

The system is designed to be used without fixing to the building that is being worked on, meaning that no patching is required after use and no sheet or tile removal is required, as is the case with standard edge protection, which fixes to the rafters.

Upright posts are secured to the building using a cantilever bracket that tightens under the eves.  With no bolts required, damage to the facade is avoided, and posts can be easily relocated around the building as required.

Lower, mid and top guardrails are added between the posts using couplers and aluminium tube to complete the fast and effective edge protection system for roofs.

For facade access below the soffits, add Easy Deck cantilever brackets at any height to support access platforms and guardrails.

An added benefit is the speed and ease of installation – EasyRail is proven to be up to three times as quick to install as standard edge protection.

Features & Benefits:

  • Easyrail roof edge protection is available in 4 standard post heights, 1m, 2m, 3m and 4m these can also be joinedusing the Easyrail joining spigot.
  • For installation, the cantilever bracket simply slides up the posts and is tightened under the eaves.
  • Using couplers and aluminium tube, base, mid and top rails can be installed in seconds.
  • Easyrail is the ultimate safe solution for any low level roof edge protection application you may have.
  • Available in ready to go house packs.
  • Also available in individual components

 

Your solution is just a click away

The Solution Selector will recommend the best access solution for your needs in 30 seconds.

The SafeSmart Difference