1200mm Double Width Portable AdjustaStairs
1200mm AdjustaStairs – Double Width
1200mm Double Width Portable AdjustaStairs
1200mm AdjustaStairs – Double WidthSafeSmart Access’s Double Width AdjustaStairs offer all the same features as our single-width AdjustaStairs. However the double width stairs bring added efficiency and safety to the worksite. Ideal for temporary batter access, navigating pits, trenches, deep excavations, and moving between multi-level construction floors, these stairs can be set at various angles while ensuring a flat surface for secure footing, thanks to the 1200mm wide self-leveling treads. This means the stairs can suit any height within the stairs range limits stated under the variations tab.
At a 1200mm width, these AdjustaStairs allow two-way access and egress, eliminating wait times for workers to finish scaling the system. With an impressive weight rating of SWL 2.5kPa, and a big truss underneath, these stairs support multiple workers carrying tools safely with one free hand.
Built from lightweight yet heavy duty aluminium, AdjustaStairs are easily portable across site and can be conveniently folded flat for storage or transport. These units can be assembled by just two people in seconds and are easily joined together in-line to create longer stair sets.
Our double-width AdjustaStairs are also craneable and have optional crane lifting lugs, enabling placement in tighter spaces or over walls and partitions.
They are compliant with AS/NZS 1576:2015 & AS 1657:2018 standards and are proudly manufactured in New Zealand.
- 1200mm wide aluminium stairs
- Stairs will self-level to suit the angle of the batter
- 500kg load rating
- Multiple stairs can be joined end to end to span any batter length
- Top and mid landings can be constructed from Proscaf or custom aluminium fabricated
- To fix, the stairs can be bolted into a timber sleeper or structural ply at the top, and pinned into the dirt at the bottom
- Adjustability of the stairs makes them ideal for excavation access, where levels are constantly changing
- Use AdjustaStairs instead of a ladder for your primary or secondary access
- Much quicker to set up and move than a scaffold tower
Estimate the ADJUSTASTAIR you need
Input the vertical height you need to access and compatible stairs will become enabled in the dropdown. Calculated run and approach angle will be displayed below.
- Complies to AS/NZS 1892 : 1996
- Steps: 3
- Suggested Height Range: 0.49M - 0.67M
- Complies to AS/NZS 1892 : 1996
- Steps: 6
- Suggested Height Range: 0.97M - 1.33M
- Complies to AS/NZS 1892 : 1996
- Steps: 9
- Suggested Height Range: 1.43M - 2.0M
- Complies to AS/NZS 1892 : 1996
- Steps: 12
- Suggested Height Range: 1.91M - 2.67M with support truss under stringers
- Complies to AS/NZS 1892 : 1996
- Steps: 15
- Suggested Height Range: 2.39M - 3.33M with support truss under stringers
- Complies to AS/NZS 1892 : 1996
- Steps: 18
- Suggested Height Range:2.87M - 4.0M with support truss under stringers
SafeSmart Access’s Double Width AdjustaStairs offer all the same features as our single-width AdjustaStairs. However the double width stairs bring added efficiency and safety to the worksite. Ideal for temporary batter access, navigating pits, trenches, deep excavations, and moving between multi-level construction floors, these stairs can be set at various angles while ensuring a flat surface for secure footing, thanks to the 1200mm wide self-leveling treads. This means the stairs can suit any height within the stairs range limits stated under the variations tab.
At a 1200mm width, these AdjustaStairs allow two-way access and egress, eliminating wait times for workers to finish scaling the system. With an impressive weight rating of SWL 2.5kPa, and a big truss underneath, these stairs support multiple workers carrying tools safely with one free hand.
Built from lightweight yet heavy duty aluminium, AdjustaStairs are easily portable across site and can be conveniently folded flat for storage or transport. These units can be assembled by just two people in seconds and are easily joined together in-line to create longer stair sets.
Our double-width AdjustaStairs are also craneable and have optional crane lifting lugs, enabling placement in tighter spaces or over walls and partitions.
They are compliant with AS/NZS 1576:2015 & AS 1657:2018 standards and are proudly manufactured in New Zealand.
Your solution is just a click away
- 3 simple steps
- Personalised recommendations
- Easy RFQ process
